![background image](http://html1.mh-extra.com/html/amano/mx-300/mx-300_operation-manual_2918143046.webp)
40
How to Configure Breaks for Hourly Workers with
Open Shifts
This section explains how to configure breaks for hourly workers with open shifts.
Whenever an hourly worker with open shifts works longer than the configured Number of Regular
Hours in a given day, that extra time is automatically adjusted for break time. (Configurable in up to two
stages.)
Example:
Basic Hours for Break 1 = 6:00
Break Time 1 = 0:45
Break Hours 2 = 8:00
Break Time 1+2 = 1:00
If a worker were to clock in at 10:00 with the above settings in place, then Break 1 would be six hours later
from 16:00 to 16:45 (45 minutes):, and Break 2 would be from 18:45 (= 10:00 + 45 m 8 hours) to
19:00 (15 minutes). In other words, the second break is determined to start at 18:45 by deducting 45
minutes for the first break and then adding number of hours to be worked, for a total break time of 1 hour.
1
Insert PROGRAMMING CARD FOR HOURLY WORKERS WITH OPEN
SHIFT #7 and then scroll to BREAK HOURS FOR BREAK 1.
・
Insert the card and then press NEXT
(button
⑥
) two times.
2
Adjust Basic Hours for Break 1 and Break Time 1.
・
Press HOUR + (button
②
) to increase the Basic Hours for Break
1 one hour at a time.
Select "----" if you don't wish to specify Basic Hours
for Break 1.
・
Press (button
③
) to increase the Basic Hours for Break 1 one minute at a
time.
・
Press HOUR + (button
④
) to increase Break Time 1 one hour at a time.
・
Press (button
⑤
) to increase Break Time 1 one minute at a time.
Keep the corresponding button pressed to speed scroll.
Basic Hours for Break 1
Break Time 1
Note
Note
14
18
10
15
16
11
17
12
13
19
20
21
22
Break Hours 2
8 hours
Break Time 1 = 45 minutes
15 minutes
Break Time 1 + 2 (1 hour)
2 hours
Basic Hours for Break
6 hours