12
Insert PROGRAMMING CARD FOR HOURLY WORKER WITH FIXED SHIFT SCHEDULE #5.
The following settings are only valid if HOURLY WORKERS WITH FIXED SHIFT is selected as the
calculation mode. (Refer to "How to Change the Calculation Mode"
Ö
Page 22.)
<PROGRAMMING FOR HOURLY WORKERS WITH FIXED SHIFT>
The MX-300 is capable of using a specified "rounding unit"
to round off the IN, OUT and Out-for-Personal-Errand
times for calculation of work hours on a daily basis.
You can configure up to four types of times zones whose
cumulative totals can be calculated individually during
monthly totaling.
If there aren't any time zones configured, then the whole
day starting from Day Change Time to one minute prior
to the next day Day Change Time is treated as the A
Time Zone. If you configure a Beginning Time for the B,
C and D Time Zones, then the A Time Zone is reduced to
the time from the start of Day Change Time to the start
of the next time zone. The remaining zones likewise
extend until the start of another time zone.
Fixed Shift Time Zone for Hourly Workers
Not configured
Factory Setting
Configure
Don't
configure
"How to Configure
Fixed Shift Time
Zones for Hourly
Workers"
Go to Page 35
Time Rounding
Press Next
(button
h
)
If there isn't a time zone configured:
If the B Time Zone Beginning Time is configured:
If the C Time Zone Beginning Time is configured:
If the D Time Zone Beginning Time is configured:
A Time Zone
A Time Zone
B Time Zone
C Time Zone
B Time Zone
A Time Zone
A Time ZoneB Time ZoneC Time ZoneD Time Zone
B Time Zone
Beginning Time
C Time Zone
Beginning Time
B Time Zone
Beginning Time
C Time Zone Beginning Time
B Time Zone Beginning Time
D Time Zone Beginning
Ti
Rounding Unit
Other
Settings
completed
PROGRAMMING CARD FOR
HOURLY WORKER WITH FIXED
SHIFT SCHEDULE #5 is ejected.
15 minutes
Factory Setting
Adjust
Don't adjust
"How to Adjust the
Rounded Unit for
Time Rounding"
Go to Page 34
Calculating Time Spent on Personal Errands
The time spent on personal errands (time from GO-OUT to BACK) is
calculated in single minute units. This time is rounded up.
Example: GO OUT: 10:10 BACK: 10:51
Ö
The net errand time = 41
minutes
If the rounding unit is 15 minutes: Errand time = 45 minutes
If the rounding unit is 30 minutes: Errand time = 60 minutes
A Time
Zone
A Time
Zone
Break
Time 1
B Time Zone
Day Change Time
B Time Zone Beginning Time
Break Time 1 Beginning Time
Break Time 1 End Time
IN Time
OUT Time
OUT Time
This time is rounded up
This time is rounded
d
This time is rounded
down
Insert PROGRAMMING CARD
FOR HOURLY WORKER WITH
FIXED SHIFT SCHEDULE #5
No calculation
Day Change Time minus 1 minute
Day Change Time minus 1 minute
Day Change Time minus 1 minute
Day Change Time minus 1 minute
Press Next
(button
h
)
three times
Day Change Time
Day Change Time
Day Change Time
Day Change Time