![background image](http://html1.mh-extra.com/html/amano/mx-300/mx-300_operation-manual_2918143008.webp)
2
Component Names and Functions
This section provides a summary of the names and functions of the time recorder unit's
components.
FRONT
Button Functions
As pictured above, the function of the MX-300's
d
,
e
,
f
,
g
and
h
buttons change to reflect the
corresponding functions listed in the headings of the programming card currently being used. Hence,
explanations in this manual involving the functional name of these buttons will change with card being
discussed.
Using the card pictured above as an example, the following table corresponds to the
Rounding Unit
Date
parameter of BASIC PROGRAMMING CARD #
7
. (
Refer to page 38.)
Button
Button name used in this
manual based on
corresponding card heading
Function
c
not used
Not available for use with this programming card.
d
15 min.
d
button
Press this button to configure the
rounding unit to 15 minutes
.
e
30 min.
e
button
Press this button to configure the
rounding unit to 30 minutes
.
f
OTHER
f
button
Press this button to
scroll through all the options (1, 5, 10, 15, 20, 30
and 60) until you reach the desired setting.
g
NO CAL
g
button
Press this button to
configure no rounding (display = "0")
.
h
NEXT
h
button
Press this button to confirm the setting and move onto the next item.
h
Button
(Refer to page 48.)
c
Button
(Refer to page 47.)
Top Cover
LCD Display
Displays the time, and
programming data.
Card Slot
Insert time cards and programming cards
here.
When making changes, insert the
appropriate programming card.
defg
Buttons
Not used in normal operations.
* If No Calculation mode is enabled: Press
the corresponding button and then insert the
time card.