![background image](http://html1.mh-extra.com/html/amano/mx-300/mx-300_operation-manual_2918143023.webp)
17
How to Adjust the Time (Clock)
This section explains how to adjust the MX-300's clock when the clock display is ahead or
behind the current time.
If you attempt to move the clock forward or backward beyond the actual time the MX-300 might not be
able to punch the same time card. For example, if you move the MX-300's clock back after it punched a
time card, the MX-300 will generate error E-17 (CLOCK TAMPERING ERROR) and will not be able
to punch the time card.
1
Insert BASIC PROGRAMMING CARD #1
・
The card is automatically scrolled to the TIME
SETTINGS position and the current time is
displayed.
2
Adjust the time.
・
Press HOUR + (button
②
) to increase the time one
hour at a time.
・
Press (button
③
) to increase the time
one minute at a time.
・
Press MINUTE - (button
④
) to decrease the time
one minute at a time.
The clock's seconds are automatically reset to 0,
so set the clock one minute ahead of the current
time.
3
Press NEXT (button
⑥
).
・
At the same instant when you press NEXT (button
⑥
), the clock new time is started with its seconds
reset to 0. (If you changed the minutes.)
If you don't change the clock's minutes but
only the hours, then the clock's seconds
won't be reset to 0 when you press NEXT
(button
⑥
).
4
Press NEXT (button
⑥
) two times and then press END (button
⑥
) to exit.
・
The programming card is ejected and the new time is displayed.
If you lose or can't find BASIC PROGRAMMING CARD #1, but still need to adjust the
clock right away, see "If You Lose a Card" on page 59 for details.
Note
Note
Note
Note