![background image](http://html1.mh-extra.com/html/amano/mx-300/mx-300_operation-manual_2918143005.webp)
CAUTION
・
Do not place the MX-300 on an uneven or inclined surface.
If the MX-300 is placed on such a surface it might tip over or fall, resulting in damage
or injury.
・
Do not place any container filled with water or metal ware on the MX-300.
If water spills or enters the MX-300, it could result in fire or electrocution.
・
Do not place the MX-300 near a kitchen table or humidifier from where oily
smoke or moisture is emitted, or place the MX-300 in dusty locations.
Doing so could result in fire or electrocution
・
Prepare a fixture suited to the wall material that is capable of sufficiently
bearing the weight of the MX-300.
If the MX-300 is not correctly mounted, it might fall, resulting in damage and/or injury.
・
When disconnecting a power plug be sure to hold the plug, not the cord.
Pulling the power cord might damage it, possibly causing fire or electrocution.
・
Unplug the power cord from the outlet prior to attempting to replace the fuse or
perform wiring.
Leaving it plugged in could result in fire or electrocution.
Attention
Battery for memory backup is consumable article.
Please contact the sales company when it is necessary to replace them.
For disposing the used articles, please follow the rules and regulations of the local government or contact
the sales outlet.
The power supply cord is intended to serve as the disconnect device.
The socket-outlet shall be near the equipment and shall be easily accessible.
Electromagnetic Compatibility and the Low Voltage Directive
This apparatus has been verified for compliance with EU (European Union) directives 2004/108/EC for
electromagnetic compatibility (EMC) for operation at 220-240V / 50Hz and with the low voltage directive
2006/95/EC. It bears the CE mark.
!
PROHIBITED!
PROHIBITED!
HOLD THE PLUG WHEN
UNPLUGGING!
USE A FIXTURE!
HOLD THE PLUG WHEN
UNPLUGGING!
NO MOISTURE OR
DUST!