manualshive.com logo in svg

Amano MX-300, Operation Manual, Page: 70 / 90

Share
Download
Amano MX-300 Operation Manual Download Page 70

64 

 

Error Codes 

When the MX-300 generates an error, a two-tone or monotone beep is sounded and the 

accompanying error code appears on the display (E-XX). Likewise, if there is a conflict in the 

settings, the MX-300 generates a parameter error, a monotone beep is sounded and the 

accompanying error code appears on the display (P-XX). In either case, refer to the following error 

code tables to check for the corresponding action to take to resolve the error. 

Sample Display of an Error Code (E-09) 

 

 

 

 

 

 

 

 

Error Code Tables 

・

If an error only occurs for a given time card, replace it with a new time card. 

・

If the same error occurs for all time cards, please contact your local Amano service dealer or representative. 

・

If an error occurs that is suspected to be mechanical in nature, you might be able to recover the MX-300 by 

unplugging it for about 10 seconds and then plugging it back on again. If this doesn't work, please contact your local 

Amano service dealer or representative. 

 

ERROR CODE 

DESCRIPTION, POSSIBLE CAUSE AND SOLUTION 

E-00, E-02, E-03

 

E-04 

(MECHANICAL 

ERROR) 

These are errors related to the mechanical operation of the MX-300 (e.g.; memory 
related errors, printer related errors, et al.). Try unplugging the MX-300 for about 10 
seconds and then plugging it back on again. If this doesn't work, please contact your 
local Amano service dealer or representative.     

E-01, E-05, E-06, 

E-07, E-08, E-09 

(TIME CARD 

ERROR) 

Check the front and back of the time card to make sure that it is in good condition 
and then reinsert the time card. If the time card is damaged (dust, dirt, marks, bent, et 
al) replace it with a new time card. 

E-10 

(BUTTON NOT 

PRESSED YET) 

Press the corresponding button (IN, OUT, et al) and then reinsert the time card.   

E-12 

(INVALID CARD) 

An invalid kind of card was inserted. Insert a correct type of time card. 

 

Summary of Contents for MX-300



























































































Reviews:

No comments