![background image](http://html1.mh-extra.com/html/amano/mx-300/mx-300_operation-manual_2918143074.webp)
68
3
Lift the display up.
・
Lift the display up as shown below.
4
Remove the old ribbon cartridge.
・
As illustrated, place two fingers on the ribbon cartridge
release tabs, push down and then toward the case. While
holding down the tabs with one hand, remove the ribbon
cartridge by its grip with the other hand.
5
Insert the new ribbon cartridge.
・
Insert the new ribbon cartridge
between the ribbon guide and
printer head. Press down the
ribbon cartridge until it clicks into
place.
6
Remove the slack in the ribbon.
・
Turn the knob clockwise to remove any slack in the
ribbon.
7
Put the top cover back on.
8
Plug the power cord back into the outlet.
・
The display will show the current time.
Be careful not to touch
with this area!
Ribbon guide
Printer head
Knob
Release tabs
Gri