61
DISABLING THE CALCULATION FEATURE ············
The MX-300 is a time recorder equipped with the ability to calculate times, but there may be times in the
course of your operations where you will find it useful to disable the calculation feature. There are two
basic ways of disabling the MX-300's calculation feature:
●
THE "NO CAL" SETTING
When this setting is enabled, the MX-300 doesn't calculate working hours but only punches the IN/OUT
times on the time card. Different from when the NO CALCULATION / ON setting is enabled,
the
MX-300 will continue to perform Auto-Column-Shifting, keeping it unnecessary for workers to
use the operation buttons.
(Maximum No. of Employees: 50). In addition, the NO CAL setting can be
enabled for both regular employees and hourly workers or for only one or the other.
* While the NO CAL setting is enabled for a given type of employee (regular employee, hourly worker
with fixed shift and hourly worker with open shift), the all other corresponding settings are disabled.
●
THE "NO CALCULATION / ON" SETTING
When this setting is enabled, the MX-300 doesn't calculate working hours but only punches the IN/OUT
times on the time card. Also, depending on the number of time punches,
the MX-300 won't perform
Auto-Column-
Shifting. Therefore when this setting is enabled, all employees will need to check and
select the print zone.
* While the NO CALCULATION / ON setting is enabled, all the regular employee, hourly worker
with fixed shift and hourly worker with open shift settings are disabled.
The following combinations are available:
A.
Time punch only (no calculation) for regular employees and hourly workers;
Auto-Column-Shifting disabled:
→
Select the 1 ON option of the NO CALCULATION
B.
Time punch only (no calculation) for regular employees and hourly workers;
Auto-Column-Shifting enabled:
→
Hourly Workers: Select the NO CAL option of the ROUNDING UNIT setting for the type of
hourly worker selected for the TYPE OF SHIFT setting (Refer to "How to Change the
Calculation Mode" on page 22)
→
Regular Employees: Skip employee card registration.
C.
Calculation for regular employees, but time punch only (no calculation) for hourly
workers:
→
Hourly Workers: Select the NO CAL option of the ROUNDING UNIT setting for the type of
hourly worker selected for the TYPE OF SHIFT setting (Refer to "How to Change the
Calculation Mode" on page 22)
D.
Calculation for hourly workers, but time punch only (no calculation) for regular
employees:
→
Regular Employees: Select the NO CAL option of the ROUNDING UNIT setting