![background image](http://html1.mh-extra.com/html/amano/mx-300/mx-300_operation-manual_2918143041.webp)
35
How to Configure Fixed Shift Time Zones for Hourly Workers
This section explains how to configure time
zones. You can configure up to four types of
times zones. (See page 5 for more
information regarding time zones.)
If there aren't any time zones configured, then the
whole day starting from Day Change Time to one
minute prior to the Day Change Time the next day
is treated as the A Time Zone. If you configure a
Beginning Time for the B, C and D Time Zones,
then the A Time Zone is reduced to the time from
the start of Day Change Time to the start of the
next time zone. The remaining zones likewise
extend until the start of another time zone.
1
Insert PROGRAMMING CARD FOR HOURLY WORKERS WITH FIXED
SHIFT #5 and then scroll to B TIME ZONE BEGINNING TIME.
・
Insert the card and then press NEXT (button
⑥
).
2
Adjust the B Time Zone Beginning Time.
・
Press HOUR + (button
②
) to increase the B Time Zone
Beginning Time one hour at a time.
Select "----" if you don't wish to specify a B
Time Zone Beginning Time.
・
Press (button
③
) to increase the B
Time Zone Beginning Time one minute at a
time.
Keep the corresponding button pressed to speed
scroll.
3
Press NEXT (button
⑥
).
・
The B Time Zone Beginning Time is confirmed and the
card is automatically scrolled to the C Time Zone
Beginning Time position.
4
To configure C and D Time Zones, repeat steps 2 and 3.
・
Press NEXT (button
⑥
) to scroll to the time zone you wish to configure (C or D Time Zone) and
then repeat the instructions from step 2 and 3 and then press button
⑥
to confirm the setting.
5
To exit, press button
⑥
until the card ejected.
・
Press NEXT (button
⑥
) until the card is positioned to D Time Zone then press END (button
⑥
) to
exit. The programming card is ejected and the current time is displayed.
Note
Note