manualshive.com logo in svg

Amano MX-300, Operation Manual, Page: 2 / 90

Share
Download
Amano MX-300 Operation Manual Download Page 2

1 

IMPORTANT SAFETY OPERATION

 ·· 

 

To ensure safe operation, please carefully read the following warnings and cautions prior to using the 

MX-300.

 

 

 

WARNING 

This symbol is used throughout this manual to indicate that misuse may result in 
death or serious injury due to electrocution, et al. 

 

■

 

Do not use a voltage other than the power source voltage specified for use with product. 

■

 

Do not attempt to insert or unplug the power plug with wet hands. 

■

 

Do not place heavy objects on, jam, pull or bend the power cord. 

■

 

Do not remove other than the top cover. (There are high-voltage components inside that can cause 
electrocution.)  

■

 

If any abnormality occurs such as heating-up or strange odor emission, or if any foreign matter (metal, water, 
liquid) gets inside the MX-300, immediately disconnect the power plug from the power outlet and contact your 
local Amano service dealer or representative.

 

Note:   "Serious injury" includes loss of eyesight, burns (of varying severity) , electrocution, bone fracture, poisoning and other 

that have serious after-effects or any other injury that requires workers to be hospitalized and/or receive prolonged medical 
treatment.   

"Personal injury" includes burns, electrocution and other that do not require hospitalization and/or prolonged medical care. 

 

   

CAUTION 

This symbol is used throughout this manual to indicate that misuse can result in 
personal injury or damage due to fire, electrocution, et al. 

 

■

 

Do not use a voltage other than the power source voltage specified for use with product. 

■

 

Do not attempt to insert or unplug the power plug with wet hands. 

■

 

Do not place heavy objects on, jam, pull or bend the power cord. 

■

 

Do not removing anything other than the top cover. (There are high-voltage components inside that can cause 
electrocution.)  

■

 

If any abnormality occurs such as heating-up or strange odor emission, or if any foreign matter (metal, water, 
liquid) gets inside the MX-300, immediately disconnect the power plug from the power outlet and contact your 
local Amano service dealer or representative.

 

Note: "Damage" includes damage to house, household goods, livestock and pets. 

 

POWER RELATED PRECAUTIONS

 

■

 

The power requirements for the MX-300 are AC220 to 240 V ± 10% (50/60Hz). Please use a stable power 
supply that matches these requirements. 

■

 

Please provide the MX-300 with a stable and dedicated 24/7 power supply that is not shared with other 
devices. 

■

 

The time recorder unit is equipped with a lithium battery. In the event of a power failure, the internal clock will 
be maintained by power from the battery. However, the MX-300 is not capable of processing time cards during 
a power failure.   

■

 

When performing maintenance that involves opening the time recorder unit's cover (such as replacing the 
ribbon cartridge), the operator should ground him/herself to a large metal object (such as a desk). Failure to do 
so could result in the time recorder unit malfunctioning. 

！

！

Summary of Contents for MX-300



























































































Reviews:

No comments