![background image](http://html1.mh-extra.com/html/amano/mx-300/mx-300_operation-manual_2918143050.webp)
44
Failure to observe the following might cause the MRX-30 to malfunction:
・
Never attempt to use bent cards.
・
Never attempt to force a card into or out of the MX-300.
EVERYDAY USE
··········
This section covers how to properly insert time cards, totalization cards and programming cards and how to
perform daily care of the MX-300.
How to Insert a Card
Gently insert the card into the card slot and let go of it.
The card will be automatically fed in, printed and then ejected.
・
Make sure the card is perpendicular to
the card slot when inserting it.
・
If you attempt to force a card in
diagonally, the printing will be off and
led to a card reading error. (
→
page 63)
・
Only use MRX time cards with the
MX-300.
Daily Care
(Always be sure to unplug the MX-300 prior to attempting maintenance!)
WARNING
Do not attempt to insert or unplug the power plug with wet hands. Doing so
could result in fire or electrocution.
CAUTION
Always unplug the power cord gently. Ripping the cord out of the outlet
might damage the cord and possibly result in fire or electrocution.
・
If the case gets dirty, gently wipe it with a soft cloth moistened with either water or a neutral
cleaning agent.
・
Do not use benzine thinner etc. to clean the MX-300.
IMPORTANT!
!
!
Note
NO WET HANDS!
GENTLY UNPLUG
THE PLUG!