50
CONVENIENT FEATURES
······
Daily Totals
The MX-300 totals and prints the overtime worked by regular employees and the time worked by hourly workers on
a daily basis.
(Calculations will not be made if No Calculation mode or the "NO CAL" option is enabled (see page 61).)
・
If there are only 1 or 3 punches when the MX-300 attempts to total the daily times, an error will be generated
and the corresponding calculation will not be made.
Print Example
If an employee clocks out before
Shift End Time ("Early-Leave") the
OUT punch will be marked with an
"E"
If an employee works past the Day
Change Time threshold (works an
"all-night") and then presses button
①
when clocking out the OUT punch will be
marked with an "A" and the amount of
overtime will be printed in the total
column.
If an employee presses button
⑥
when
clocking out the day will be treated as a
"special day" and the total amount of work
that day will be printed in the total column.
If an employee clocks in
after Shift Beginning Time
("Late-Arrival") the IN punch
will be marked with an "L"
If an employee forgets to press button
③
when clocking out for a personal
errand ("out-for-personal-errand") it
will be treated as an "Early-Leave" and
the OUT punch will be marked with an
"E." However, this will be corrected by
a recalculation if the employee clocks
back in after their errand and then out
again at the end of their shift.
If an employee works overtime and then clocks out
the OUT punch will be marked with a "T" and the
amount of overtime will be printed in the total
column.
If an employee forgets a punch which results in
only 1 or 3 punches on their card for that day,
the MRX-30 can't calculate for that day. An "X"
will be added to the last punch if the employee
finishes a work pattern that can't be calculated
and then they press a button. (The example
shown here is of an employee that forgot to
punch back in when coming back from a
personal errand and then pressed button
⑤
when clocking out for the day.)
Regular Employee Time Card