30
E xam ple: O vertim e B eginning T im e: 17:30
D ay C hange T im e
2
3
4
O ve rtim e Z o n e
22
23
24
1
18
13
19
20
21
14
15
16
17
9
10
11
12
5
6
7
8
R e gu lar H o u rs T im e Z on e
O vertim e B eginning T im e
B reak T im e
S hift B eginn ing T im e
S hift E nd T im e
How to Adjust the Overtime Beginning Time
This section explains how to adjust the Overtime Beginning Time.
When an Overtime Beginning Time is configured, the time from the corresponding start time to a minute
prior to Day Change Time is treated as an Overtime Zone.
If the Overtime Beginning Time is set to a time other than the Shift End Time, then the time between the
two is treated as break time.
1
Insert PROGRAMMING CARD FOR REGULAR EMPLOYEES #3 and then
scroll to OVERTIME BEGINNING TIME.
・
Insert the card and then press NEXT (button
⑥
) two times.
2
Adjust the Overtime Beginning Time.
・
Press HOUR + (button
②
) to increase the Overtime Beginning
Time one hour at a time.
･･･
21
→
22
→
23
→
"----" (not configured: as displayed on
the right)
00
→
01
→
02
→
･･･
display repeats in this order
・
Press (button
③
) to increase the Overtime
Beginning Time one minute at a time.
Keep the corresponding button pressed to speed scroll.
3
Press NEXT (button
⑥
).
・
The Overtime Beginning Time is confirmed and the card is scrolled to the next setting (Midnight
Shift).
4
Press END (button
⑥
) to exit.
・
The programming card is ejected and the current time is displayed.
Note
Not configured (factory setting). Select this if
you don't wish to specify an Overtime
Beginning Time.
Note
Day Change Time minus
1 minute