![background image](http://html1.mh-extra.com/html/amano/mx-300/mx-300_operation-manual_2918143057.webp)
51
Time Print When the Clock Gets Changed
If the time is changed more than 5 minutes via either of the following methods then the first punch (and
only the first punch) after the change will result in the hour portion being printed in a slightly smaller
font size and being underlined:
・
Time Settings operation using Basic Programming Card #1 (see page 17), or a
・
Time Settings operation via the interior operation panel when the programming card is missing (see
page 59) (However, if the time is changed back before a punch is made then this feature won't be
executed.)
Normal Time Print
Time Print after Clock Has been Changed
Hourly Worker with Open Shift Time Card
The daily total is
calculated and printed
here.
Hourly Worker with Fixed Shift Time Card
The daily total is
calculated and printed
here.
On the second punch, the MX-300 assumes the day has ended for this worker and totals the
hours to that point. However, if the worker clocks back in and out again, the second punch and
third punches are treated as a GO-OUT and BACK (a clock-in and out for a personal errand) and
then the fourth punch is treated as the OUT punch and the daily total is calculated again. (If the
worker had pressed button
③
when clocking out for their personal errand, than the MX-300
would not have calculated the daily total at that time.)
If the worker has worked longer than the
set Number of Regular Hours the OUT
punch will be marked with a "T"