![background image](http://html1.mh-extra.com/html/amano/mx-300/mx-300_operation-manual_2918143031.webp)
25
If you perform Data Initialization, time cards in use won't be correctly totaled or
printed. Do not attempt this operation unless instructed to do so by your local
Amano service representative.
How to Perform Data Initialization
This section explains how to initialize setlings and delete all the individual data.
Data Initialization
This is the method for restoring the factory settings (except for the time and date settings.)
1
Insert BASIC PROGRAMMING CARD #2 and then scroll to DATA INITIALIZATION.
・
Insert the card and then press NEXT (button
⑥
) three
times.
2
Enter the password ("44").
・
Press DIGIT 1 + (button
③
) to increase the first digit.
・
Press DIGIT 2 + (button
④
) to increase the second digit.
・
Adjust to "44."
3
Press NEXT (button
⑥
).
・
The MX-300's settings are restored to the factory settings. (A monotone beep is sounded to confirm
that the operation has been executed.)
・
The programming card is ejected and the current time is displayed.
* If you enter the wrong password:
A two-tone beep is sounded and "ERR" is displayed on
the LCD to indicate an error.
Press button
⑥
. The programming card is ejected and
the current time is displayed. Try again from step
1
.
* If you want to abort the operation:
To abort the operation, enter the password "00" or "99" and then press button
⑥
. The programming card
is ejected and the current time is displayed.
IMPORTANT!