Amada MM-L300A, Original Instructions Manual

Page: 65 / 180

MM-L300A
6. How to Operate the PC Software
6-24
(3) Filter
The reference waveform can be narrowed by setting the filtering condition when
creating waveforms.
1) When the [Filter] button on the Basis Waveform Calculation Window is clicked,
the Filter Window is displayed.
2) Default and contents for parameters to set are as follows.
Default Contents
Start
(Today) 2000/01/01 or later, earlier than the end day
00:00:00 00:00:00 to 23:59:59
End
(Today) 2000/01/01 or later, later than the start day
23:59:59 00:00:00 to 23:59:59
Filter mode
Basis waveform condition:
This is a search condition to create a reference
waveform. This condition is saved when a
reference waveform is created and a file is saved.
In this mode, only a waveform used for calculation
is displayed by default the next time the Basis
Waveform Calculation Window is opened. (When
[Display only selected wave.] is deselected, unused
waveforms matching the search condition are also
displayed.) In this mode, filtering condition and
search date cannot be changed.
Specified condition:
Waveform data can be searched by specifying an
arbitrary search condition. Clicking the
button saves the condition. In this mode,
information on the selected waveform data is not
held. Clicking the
button sets the start date
to 0:00:00 today and the end date to 23:59:59
today.
Condition ALL ALL, No.00 to No.63