Amada MM-L300A, Original Instructions Manual

Page: 20 / 180

MM-L300A
5. Connecting Equipment
5-6
(5) Coaxially Mounting Adapter
This section describes the optional coaxially mounting adapter which allows to use the
SU-N300A
coaxially.

Some output units with CCD camera do not support coaxial
measurements. For details, contact us.

For the combination outline drawing of each output unit and the
coaxially mounting adapter, contact us.
The
SU-N300A
can be fixed coaxially with the output unit by mounting the coaxially
mounting adapter to our output unit with CCD camera.
Since measurements can be performed coaxially, the measurement position of the
SU-N300A
follows even when the output unit moves.
The coaxially mounting adapter is mounted at the position where the camera unit of the
output unit with CCD camera is mounted.
The camera unit assembled on the output unit is removed. Therefore, the appearance of
the output unit changes and the camera image changes slightly.
Be very careful when using the camera image such as image processing because image
may change. For the outline drawing of the coaxially mounting adapter and installation
space, refer to
14. Outline Drawing .
There are mainly two patterns for installation.
CAUTION