Amada MM-L300A, Original Instructions Manual

Page: 41 / 180

MM-L300A
5. Connecting Equipment
5-27
(2) How to set the trigger output from the YAG laser welder (ML-2xxx)
It is necessary to change the laser device setting to output the trigger from the laser
device on the MEMORY SWITCH screen of the INITIALIZE screen.
Refer to the operation manual for each YAG laser welder to set No.6 of SWITCH 3 to
ON.
No.6 of SWITCH 3 is described as “Unused” on the operation manual for each YAG
laser welder, but making this change allows the laser device to output the trigger.
Example: MEMORY SWITCH screen of ML-2050A/2051A/2150A
Example: MEMORY SWITCH screen of
ML-2350A/2351A/2450A/2451A/2550A/2551A/2650B/2651B