Amada MM-L300A, Original Instructions Manual

Page: 138 / 180

MM-L300A
9. Interface
9-12
(2) From the trigger input to the measurement judgment output (common)
The following diagram shows the lapse of time in the case where measurement by
the
MM-L300A
is performed 4 times, and the first and second measurements are
judged as OK and third and fourth measurements are judged as NG.
Internal/external
trigger
MM-L300A
measurement
Depending on the set condition
MEASURE output
Depending on the set condition
Monitor OK output
(pulse output)
Monitor OK output
(level output) *2
Monitor OK output
(level output)
Monitor NG output
(level output) *2
500μs max.
450μs max.
450μs max.
250μs×Setting times (100 max.) *1
250μs×Setting times (100 max.) *1
*1: When the next pulse signal is output before the time of “250
μ
s x setting times”,
this signal becomes continuous without being turned off.
*2: For the level output setting, this signal is not turned off when the same signal
remains.