Amada MM-L300A, Original Instructions Manual

Page: 53 / 180

MM-L300A
6. How to Operate the PC Software
6-12
If the transferred waveform is abnormal, updating the display of the waveform is
stopped and the abnormal waveform is continuously displayed.
Also, the status display changes as shown below and the [Graph Refresh On] button is
displayed. When the [Graph Refresh On] button is clicked, updating the display of
waveforms is restarted.
Normally, [Busy] is displayed in Status 1 and [Normal Wave] is displayed in Status 2.
(3) Reception stop of waveform data
Clicking the [Stop data receive] button stops transferring the waveform data and return
to the ready state.
* Even if the reception of waveform data is stopped, the
MM-L300A
itself
obtains waveform. The
MM-L300A
can keep data for up to 20000
waveforms in the internal memory. When the number of waveforms exceeds
20000, the oldest waveform data is sequentially erased and overwritten. Click
the [Start data receive] button again to transfer data held in the
MM-L300A
in the personal computer.
Status 2
・
Normal Wave
・ AbNormal Wave
Status 1
・
Ready
・ Busy
・ Offline