Amada MM-L300A, Original Instructions Manual

Page: 19 / 180

MM-L300A
5. Connecting Equipment
5-5
(4) Mounting the Filter for SU-N300A
This section describes how to mount the optional filter for SU-N300A to the
SU-N300A
.

Dust may enter the
SU-N300A
if the protective glass holder and
the filter for SU-N300A are not properly tighten.

Do not touch the surface of the protective glass and the optical
filter.

The protective glass may stick to the protective glass holder
through the intermediary of the O-ring. In such case, gently press
the protective glass with a finger from above the lens cleaning
paper to remove it.
1) Remove the protective glass holder at the tip of the
SU-N300A
from the
SU-N300A
.
2) Mount the filter for SU-N300A with the male screw at the tip of the
SU-N300A
.
3) Mount the protective glass holder removed in Step 1 with the male screw at the tip of
the filter for SU-N300A.
At this time, confirm that the protective glass in the protective glass holder and the
O-ring are fitted at a proper position.
CAUTION