Amada MM-L300A, Original Instructions Manual

Page: 105 / 180

MM-L300A
6. How to Operate the PC Software
6-64
(12) Setting Parameters List
Shown below is parameters list set on each window.

Menu Window
Item Contents Range (default)
Condition Number Specifies the condition number. 00 to 63 (00)

Acquire Wave Data Window
Item Contents Range (default)
- - -

Condition Select Window
Item Contents Range (default)
Unit ID Specifies the ID of the
MM-L300A
.
(can be set at the time of off-line.)
00001 to 65535
(ID specified on the
Maintenance Window)

Condition Configuration Window
Item Contents Range (default)
Measurement Time Specifies the time required for obtaining a
waveform. 1 to 999 (300)
Specifies the unit of the time required for
obtaining a waveform. usec, msec, sec (msec)
*1
Comment Specifies the name of condition. -
Upper Limit Specifies the upper limit of judgment. -100 to 100 (50) *2
Lower Limit Specifies the lower limit of judgment. -100 to 100 (-50)
*2
Threshold Specifies the judgment threshold. 0 to 65535 (0)
Edit Start Point Specifies the start point of judgment. 0 to 999
Edit End Point Specifies the end point of judgment. 0 to 999
*1 Up to 999 sec.
*2 Default value in an unregistered state. Default in calculation is (0).

Basis Waveform Calculation Window
Item Contents Range (default)
Waveform selection
menu Selects / selects all / deselects all
measurement waveform(s). Select, Select All
*1
,
Deselect All (Deselect All)
Waveform display The selected waveform is displayed by the
[Graph] button. 1 to 100 *2 (0)
Display start number Specifies the start number to display the
measurement waveform. 1 to the number found by
filtering conditional search
*1 (1)
*1 The maximum number of measurement waveforms is 65535.
*2 The maximum number of waveforms to be graphically displayed is up to 100. Also,
in [Select All], waveform of a page displayed is displayed by switching the page.