MD Series
1. Special Precautions
1-3
Do not splash water on the Power Supply
Water splashed over the electric parts can cause electric shock and short
circuits.
Use proper tools (wire strippers, pressure wire connectors, etc) for
termination of the connecting cables
Do not cut the conductor of wire. A flaw on it can cause fire and electric
shock.
Install the Power Supply on firm and level surface
If the Power Supply falls or drops, injury may result.
Do not place a water container on the Power Supply
If water spills, insulation will deteriorate, and this may cause electric leak and
fire.
Keep combustible matter away from the welding machine
Surface flash and expulsion can ignite combustible matter. If it is impossible
to remove all combustible matter, cover them with non-combustible material.
Do not cover the Power Supply with a blanket, cloth, etc.
If such a cover is used, it may be overheated and burn.
Do not use this
Power Supply
for purposes other than
welding
Use of this Power Supply in a manner other than specified can cause electric
shock and fire.
Use ear protectors
Loud noises can damage hearing.
Keep a fire extinguisher nearby
Keep a fire extinguisher in the welding shop in case of fire.
Maintain and inspect the Power Supply periodically
Maintain and inspect the Power Supply periodically, and repair any damage
nearby before starting operation.
CAUTION
！
Summary of Contents for MD-A8000B-05 Series
Page 95: ......
