MD Series
5. Connection
5-10
●
On the start signal holding
*1: When START SIG.HOLD on the STATUS screen is set to NO HOLD, turn on the
start signal until the end signal output.
*2: When START SIG.HOLD on the STATUS screen is set to WE HOLD, turn on the
start signal until the squeeze end.
*3: When START SIG.HOLD on the STATUS screen is set to SQ HOLD, turn on the
start signal until the squeeze start.
3
On the end signal output time (Common to MD series)
*1: Changes depending on the setting of END SIG.TIME on the STATUS screen.
When the setting is 10 ms to 200 ms, the end signal is output for the set time.
When the setting is 10 ms + ST, in addition to at least 10 ms, the end signal is
output while the 2ND STAGE is ON.
(2ND STAGE)
(SOL)
(END)
HD
WE
DS
UP
SQ
Start input
Weld force output
Welding current
End signal output
*1:NO HOLD setting
*2:WE HOLD setting
*3:SQ HOLD setting
(2ND STAGE)
(SOL)
(END)
*1
HD
WE
DS
UP
SQ
Start input
Weld force output
Welding current
End signal output
Summary of Contents for MD-A8000B-05 Series
Page 95: ......
