MD Series
6. Explanation of the Screen
6-2
(2) Setting the Schedule (SCHEDULE Screen)
Sets the schedule (welding condition).
Up to 31 weld schedules can be set on the MD series.
The screen is used to set the length of weld time, weld current and so on.
Move the cursor ( ) to SCHEDULE and press the ENTER key to display the
SCHEDULE screen as follows.
①
When 2-step weld sequence is selected
When SCHEDULE MODE on the STATUS screen is set to DOUBLE
②
When 1-step weld sequence is selected
When SCHEDULE MODE on the STATUS screen is set to SINGLE
(a) SCH.#
Denotes No. of SCHEDULE (welding condition).
Input the schedule number to set. After welding, the number is switched to
the schedule number of the welding.
(a)
(b)
(c)
(d)
Summary of Contents for MD-A8000B-05 Series
Page 95: ......
