4 Use
To access this setting, select
Ventilator
, then
Patient
.
Note:
If the
Patient sett. back-up
function is activated when the ventilator is switched on, the
category corresponds to that of the last ventilated patient. See Saving the ventilation settings
and alarm thresholds on page 72.
4.8.2 Gender /Height configuration
The
“Configure Gender/Height”
function is for configuring the gender and height suggested by default
for each category of patient.
To configure the default sex and height for a patient category:
1.
From the
“Patient”
menu, select the
“Default Patient”
corresponding to the category concerned.
2.
Press
“Configure Gender/Height”
to display the configuration window.
Note:
This operation can be repeated for the Adult, Child and Baby categories.
The
“Restore Gender/Height”
key resets the default parameters (see Settings tables on page 126).
Restoration applies to all patient categories.
4.8.3 SI Unit
The
“SI Unit”
function enables the cmH
2
O unit of pressure measurement to be replaced by hPa.
4.8.4 Configuration of quick launch
The
Configuration of buttons
function serves to select the ventilation mode that is accessible from the
home screen.
The configuration function is available from the
Machine
menu.
By default, the quick launch mode is allocated to Hflow.
4.8.5 Selecting the height display unit
The
Size unit
function serves to select the unit of measurement of the size used for the calculation of
the predicted size (PBW).
It is accessed using the arrow key on the Ventilator menu.
4.8.6 Choice of communication protocol
This function allows you to select the protocol used for transmitting data from the
Monnal T60 Ad-
vanced
. See Connectivity to hospital networks on page 77.
71
Summary of Contents for MONNAL T60 ADVANCED
Page 2: ......
Page 140: ...Monnal T60 Advanced User manual 10 2 Maintenance data sheet 140...
