1 Before use
Storage information - Indications on the packaging
Minimum and maximum tempera-
ture.
Minimum and maximum humidity.
Minimum and maximum atmos-
pheric pressure.
Symbols and markings relating to accessories
Universal Device Identi-
fier.
Medical Device.
Specific symbols for IRMA
™
CO
2
measurement probe
IP44
Protection Index
according to the
EN 60529 standard
4:
protection from the penetration of
solid bodies of diameter ≥ 1 mm.
4:
protection from water splashing
from any direction
Type BF device
1.6 General safety instructions
Use of oxygen
•
Precautions in case of oxygen leak:
•
No smoking
•
Avoid any flame or source of sparks
•
Disconnect the oxygen source
•
Ventilate room during leakage and at least 20 minutes after leakage.
•
Air one‘s own clothing.
•
The device must not be in operation near any incandescent source.
•
This ventilator must not be used with inflammable anesthetic agents or explosive products.
•
Do not use the equipment with helium or helium mixed with another gas.
•
The ventilator does not directly administer nitric oxide but can be used concomitantly with a Nitric
Oxide administration system, provided that the manufacturer of the nitric oxide delivery system
has validated its use.
•
Do not use the device with components that have been contaminated by inflammable substances
(e.g. grease, oil, etc.).
•
The internal components of the device were degreased before delivery or use a type of grease
which is compatible with oxygen. Do not grease or lubricate any part of the device.
•
Medical grade oxygen must be used (i.e. dust-free and dry, H2O < 20 mg/m3).
•
The supply pressure must be between 280 kPa (2.8 bars) and 600 kPa (6 bars).
•
When the device is not in use, it is recommended that you disconnect all oxygen sources from it.
11
Summary of Contents for MONNAL T60 ADVANCED
Page 2: ......
Page 140: ...Monnal T60 Advanced User manual 10 2 Maintenance data sheet 140...
