manualshive.com logo in svg

Air Liquide MONNAL T60 ADVANCED, User Manual

Share
Download
Air Liquide MONNAL T60 ADVANCED User Manual Download Page 15

2 Description of the device

2 Description of the device

2.1 Terminology Used

The 

expiratory assembly

 denotes the 

expiratory flow sensor

 and the 

expiratory valve.

The 

expiratory valve 

designates the 

valve body

, the 

membrane

 and the 

silicone discs

.

2.2 Front view

1.

Handle: To carry the machine easily.

2.

Touch screen (8.4 inches)
•

Interface between the user and the de-

vice

•

Permits adjustment of all ventilation

settings.

3.

Alarm indicators
•

Illuminates to inform the user that an

alarm has been activated.

•

Red fast flashing (2 Hz) = high priority

•

Yellow slow flashing (0.5 Hz) = medi-

um priority

•

Steady yellow = low priority

4.

Control wheel
•

This is used to adjust and confirm the

parameters.

5.

AC power supply indicator light

6.

Internal battery status indicator

7.

Extractable battery status indicator

15

Summary of Contents for MONNAL T60 ADVANCED
















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands