Agilent Technologies 4339B, Operation Manual

Page: 96 / 287

Front P anel 4339B
Measurement Sequence Mode K ey
The Measurement Sequence Mode key toggles the measurement sequence mode ON and OFF .
This feature provides an automatic measurement process . The 4339B has two sequence modes:
the single mode and the continuous mode .
Figure 3-2. Sequence Mode
Single Mode
Figure 3-2(a) shows a measurement sequence in the Single mode . The single mode is
appropriate for measuring a DUT when the operator denes the charge time (for example , 1
minute). The single mode is performed as follows:
1. At the Ready state , pressing starts the measurement sequence , and the test voltage is
turned ON.
2. The 4339B waits for the dened Charge Time while the applied voltage is charging the
DUT .
3. After that, the 4339B measures the charged DUT .
4. At the end of the measurement sequence , the 4339B turns the test voltage OFF , and returns
to the Ready state .
Continuous mode
Figure 3-2(b) shows a measurement sequence in the Continuous mode . The continuous mode is
appropriate for measuring time related characteristics . The continuous mode is performed as
follows:
3-6 Function Reference