Agilent Technologies 4339B, Operation Manual

Page: 71 / 287

4339B Measurement Conguration
Setting the P arameters for Resistivity Measurement
T o set the parameters to calculate the resistivities (DUT thickness , Electrode Size) or to show
the current settings:
1. Press . The resistivity parameter setup main menu is displayed.
Entering Thickness of the DUT
T o enter the thickness of the DUT or to show the current setting:
2. Select Thickness using or and press .
3. Enter the desired value , or leave the current setting. Press .
4. T o exit, select Exit using or and press . Or proceed to setting Electrode Size .
Setting the Electrode Size
T o set the electrode size or to show the current setting:
5. Select ResCell using or . The following menu is displayed.
When Y ou Use the 16008B Resistivity Cell:
a. Select the electrode size that you want to use (26mm , 50mm , or 76mm ) using or ,
and press . F or example , when you select 50mm , the following menu is displayed.
Where , 50mm is the main electrode diameter , 70mm is the guard ring diameter , and B is the
eective surface coecient which is the fraction of the gap width to be added to the
diameter of the electrode .
b. T o change B value , enter the desired new value and press . Or leave the current
setting and press to exit.
Operating the 4339B 2-3