Agilent Technologies 4339B, Operation Manual

Page: 106 / 287

Front P anel 4339B
Display Mode K ey
The Display Mode key selects the display mode from the following choices:
Data Displays the measurement result. (default)
When the contact check function is ON and the contact check has failed, N.C.
(no-contact) will be displayed instead of the measurement data.
Comprtr (When comparator function is ON,) Displays the result of the comparison as
HIGH (greater than upper limit), IN (P assed), and LOW (less than lower limit), or
N.C. (contact check failed).
(When comparator function is OFF ,) Always displays OFF .
O Turns the display OFF .
(Used, for example , in GPIB remote mode .)
If you select F ormt, the following display format setup menu appears .
Digit Sets the display digits of the measurement data to 3 , 4 or 5 .
R-Unit Selects the measurement data display mode from the Exponent mode and the
Prefix mode . (See \Setting Display Mode and Display F ormat" in Chapter 2.)
Exit Exits the menu.
K ey Lock K ey
The key lock key licks out all front panel key inputs except for this key . The cancel the key
lock condition, press again. The key lock state is indicated by the annunciator .
3-16 Function Reference