Agilent Technologies 4339B, Operation Manual

Page: 126 / 287

Getting Started 4339B
T o Set the P arameters for Resistivity Measurements
The following commands set the parameters for resistivity measurements:
:CALC:RES:STH
:CALC:RES:EPER
:CALC:RES:GLEN
:CALC:RES:EAR
F or example , to measure the volume resistivity , when the thickness of DUT is 2 mm, and when
you use the 50 mm electrode and 70 mm guard ring of the 16008B Resistivity Cell, that is ,
Thickness is 0.002 m
Eective Area is 0.0019635 (= 2 (0.05/2)
2
) m
2
Eective P erimeter is 0.1885 (= 2 (0.05+0.07)/2) m
Gap is 0.01 ( =(0.0700.05)/2 ) m.
OUTPUT 717;":SENS:FUNC 'RES'"
OUTPUT 717;":CALC:FORM VRES"
!
OUTPUT 717;":CALC:RES:STH 0.002"
OUTPUT 717;":CALC:RES:EAR 0.0019635"
OUTPUT 717;":CALC:RES:EPER 0.1885"
OUTPUT 717;":CALC:RES:GLEN 0.01"
T o Set Beeper Mode
The following commands set the beeper mode:
:SYST:BEEP
:SYST:BEEP:STAT
:CALC1:LIM:BEEP
:CALC1:LIM:BEEP:COND
F or example , to set the beeper mode to emit a beep when comparison result is P ASS.
OUTPUT 717;":CALC1:LIM:BEEP:COND PASS"
T o Lock Out the Front P anel K eys
The following command locks out the front panel keys:
:SYST:KLOC
F or example , to lock out the front panel keys ,
OUTPUT 717;":SYST:KLOC ON"
T o Check Contact Integrity at the T est Fixture
The following command checks contacts at the test xture:
:SENS:CONT:VER
F or example , to enable the contact check function,
OUTPUT 717;":SENS:CONT:VER ON"
4-8 Remote Operation