Agilent Technologies 4339B, Operation Manual

Page: 82 / 287

Making a Measurement 4339B
3. Select MeasC using or , then press .
4. The capacitance value at measured DUT is displayed.
The condition of N.C. (No Connection) is shown below .
M easC < Limit
Where
MeasC Data displayed in MeasC
Limit Data displayed in Limit
Setting Current Limit
T o set the current limit:
1. Press .
2. Enter the value using the numeric keys , and press .
Setting Current Monitor
T o turn ON the current monitor , press . The following menu is dislayed.
Select On using or and press .
The current monitor value is displayed in the Measurement Settings area. See \Changing
Measurement Settings Display Mode ".
Setting Beeper Mode
T o set the beeper mode for comparator result reporting; OFF (not beeping), FAIL (beeping when
the comparator result is HIGH or LOW), or PASS (beeping when the comparator result is IN):
1. Press .
2-14 Operating the 4339B