Agilent Technologies 4339B, Operation Manual

Page: 175 / 287

4339B SENSe Subsystem
[:SENSe]:CORRection:D A T A? f OFFSet j SCAP acitance g
Returns the OPEN correction data (DC current measurement value) or capacitance
measurement data obtained by performing the OPEN correction. The capacitance measurement
data is used for the contact check function.(Query only)
OFFSet Returns the open correction data.
SCAPacitance Returns the capacitance measurement data.
Query response is a numeric value in <NR3> format.
Note
The capacitance measurement data is typical data, and it is not guaranteed.
[:SENSe]:CORRection[:ST A T e] f ON j OFF j 1 j 0 g
Sets or queries if the OPEN correction function is enabled.
Where ,
ON or 1 Enables the correction function.
OFF or 0 Disables the correction function.
[:SENSe]:CURRent:APERture <numeric value>[MS j S]
Sets or queries the measurement time mode: Short(=0.01 s), Medium(=0.03 s), Long(=0.39 s).
<numeric value> is ,
numeric 0.01, 0.03, or 0.39 (s)
Query response is a numeric value in <NR2> format.
[:SENSe]:CURRent:RANGe:A UTO f ON j OFF j 1 j 0 g
Sets or queries if the A uto range measurement mode is enabled.
Where ,
ON or 1 A uto range mode
OFF or 0 Hold range mode
Query response is 1 or 0 .
[:SENSe]:CURRent:RANGe[:UPP er] <numeric value>[P A j NA j U A j MA j A]
Selects or queries the measurement range . A vailable measurement ranges are 100 pA, 1 nA ,
10 nA, 100 nA , 1 A, 10 A, and 100 A.
<numeric value> is ,
numeric 100 pA (available when the measurement time mode is Medium or Long), 1 nA,
10 nA, 100 nA, 1 A, 10 A, 100 A (available when the measurement time
mode is Short)
UP moves to upper range .
DOWN moves to lower range .
Query response is a numeric value in <NR3> format.
GPIB Reference 5-27