Agilent Technologies 4339B, Operation Manual

Page: 174 / 287

SENSe Subsystem 4339B
[:SENSe]:CONT act:D A T A?
Returns the capacitance data at dut mesurement. The contact check function uses this
capacitance data. Refer to \Reading the Limit Data of Contact Check Function " in Chapter 2
for detail. (query only)
Query response is a numeric value in <NR3> format.
The data is incorrect if the measurement range was changed after dut measurement.
Note
The accuracy of the capacitance data is not guaranteed.
[:SENSe]:CONT act:LIMit?
Returns the contact check limit data. Refer to \Reading the Limit Data of Contact Check
Function " in Chapter 2 for detail. (query only)
Query response is a numeric value in <NR3> format.
[:SENSe]:CONT act:OFFSet <numeric value>
Set or queries an oset of contact check limit data.
<numeric value> is ,
numeric 0 to 75 [pF]
[:SENSe]:CONT act:VERify f ON j OFF j 1 j 0 g
Sets or queries if the contact check function is enabled.
Where ,
ON or 1 Enables the contact check function.
OFF or 0 Disables the contact check function.
The reference data for the contact check is obtained by an OPEN correction. An OPEN
correction is required before the contact check turns on.
Query response is 1 or 0 .
[:SENSe]:CORRection:COLLect[:A CQuire] OFFset
Measures and stores the OPEN correction data. (No query)
This command sets [SENSe:]:CORRection[:STATe] ON , which enables the correction function.
5-26 GPIB Reference