AGFA Drystar 5302 Technical Documentation Manual Download Page 279

Page: 279 / 459

EALTH

ARE

Imaging Services

Chapter 3.7

Repair and Service

Software Menus, Settings

Document No: DD+DIS150.05E

DOCUMENT CONTROL NOTE:

The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.

Edition 1, Revision 1

06-2009 printed in Germany

Agfa Company Confidential

Document Node ID: 27681930

eq_03-7_menus-setting_e_template_v07

DRYSTAR 5302

5366/100

►

Purpose of this Document

This document lists the menus for service of the printer.

It can be used as a reference work to see which setting is made in which screen.

►

Document History

Edition.

Revision

Release

Date

Changes
compared to previous Version 1.0

1.1 06-2009

•

Adapted key-operator menu overview to available menus

of software release 2.0:

Added menu "Installation – Install site data".

Added menus "Service Actions – Resistor Check

and Print Infocounters.

•

Changed page layout from DIN A3 to DIN A4.

►

Referenced Documents

Document

Title

n.a. n.a.

Summary of Contents for Drystar 5302












































































































































































































































































































































































































































































Search results

Summary of Contents for Drystar 5302

Reviews:

Brands by name

Popular brands

AGFA Drystar 5302, Technical Documentation Manual

Search results

Summary of Contents for Drystar 5302

Reviews:

Brands by name

Popular brands