manualshive.com logo in svg

AGFA Drystar 5302, Technical Documentation Manual

Share
Download
AGFA Drystar 5302 Technical Documentation Manual Download Page 22

 
 
DD+DIS238.06E 

Generic Safety Directions

 
 
 

 

DOCUMENT CONTROL NOTE: 

The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. 

Edition 1, Revision 3 

Generic Safety Directions for HealthCare Imaging Products 

Page 18 of 

28 

Usage of an un-interruptible power supply: 

 

 

Warning: 

Images can be lost due to power failure. 

Connect the equipment to an un-interruptible power supply (UPS) or an institutional 
standby generator. 
 
 
 
 

14 

Radiation Protection 

 

 

Only qualified and authorized personnel shall operate any X-Ray system. In this context 
qualified means those legally permitted to operate this X-Ray equipment in the jurisdiction 
in which the X-Ray equipment is being used, and authorized means those authorized by 
the authority controlling the use of the X-Ray equipment. Full use must be made of all 
radiation protection features, devices, systems, procedures and accessories. 
 
Ionizing radiation can lead to radiation injuries if handled incorrectly. When radiation is 
applied, the required protective measures must be complied with. 
 
 
 
 

15 

Safety Directions for Cleaning and Disinfection 

 

•

  Details about cleaning and disinfection or sterilization methods that may be used on 

SYSTEM parts or ACCESSORIES that can become contaminated through contact 
with the PATIENT or with body fluids, are referred to within the individual service 
documents. 

•

  Disconnect the power supply from the equipment prior to cleaning the equipment. 

 
 

07-2009

 

 

Agfa Company Confidential

 

 

Summary of Contents for Drystar 5302












































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands