AGFA Drystar 5302 Technical Documentation Manual Download Page 243

Page: 243 / 459

EALTH

ARE

Imaging Services

Chapter 3.6

Repair and Service

Adjustments and Calibrations

Document No: DD+DIS150.05E

DOCUMENT CONTROL NOTE:

The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.

Edition 1, Revision 1

05-2009 printed in Germany

Agfa Company Confidential

Document Node ID: 27648461

eq_03-6_adjustments_e_template_v07

DRYSTAR 5302

Type 5366/100

►

Purpose of this document

This document describes the adjustments, calibrations and image quality checks
of the printer.

►

Document History

Edition.

Revision

Release

Date

Changes
compared to previous Version 1.0

1.1 05-2009

Added

section

2.5, Compliance Film Calibration as part of

Afssaps / EUREF Calibration Procedure.

►

Referenced Documents

Document

Title

n.a. n.a.

Summary of Contents for Drystar 5302












































































































































































































































































































































































































































































Search results

Summary of Contents for Drystar 5302

Reviews:

Brands by name

Popular brands

AGFA Drystar 5302, Technical Documentation Manual

Search results

Summary of Contents for Drystar 5302

Reviews:

Brands by name

Popular brands