manualshive.com logo in svg

AGFA Drystar 5302, Technical Documentation Manual

Share
Download
AGFA Drystar 5302 Technical Documentation Manual Download Page 103

 

 

 

DD+DIS150.05E

 

Repair and Service

Machine specific tools, software tools and auxiliary means

 

Printed copies of this document are not controlled.  

The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.

 

Edition 1, Revision 0 

Drystar 5302 

Chapter 3.2/1 

1 Machine 

specific 

Tools 

In addition to the conventional service tools which every service engineer has 
in his toolbox, the following tools are required for service on the printer: 

1.1 Mandatory 

tools 

The mandatory tools are required for repair, troubleshooting or maintenance of 
the printer. 

Tool

 

Part Number

 

Purpose

 

Anti-static wrist strap 

CM+9.9999.0830.0  To avoid static discharges 

on electronic components 

Cleaning tissue (box of 50 
pieces) 

CM+309931.0 

To clean the TH 

Densitometer* 

To be bought locally To perform CDM 

calibration 

Ink Eraser 'Pelikan' 

10+999991176.0 

For the 'dry TH cleaning' 
procedure  

Isopropyl Alcohol and lint 
free cloth 

Commercially 
available 

To clean the TH. 
Alternative to Cleaning 
tissue 

Loop 8x 

CM+9.9579.9904.0 

 

To check image quality of 
films at the lightbox 

Service key  

CM+9.0426.6309.0  To override the safety 

switch 

Standard ruler (1mm) 

Commercially 
available 

For horizontal image 
adjustment 

 
 
 

 

*As DT film used in the Drystar printers has a slightly different color 
compared to conventional films, different densitometers give different density 
readings, depending on the light source. 

To make a correct density measurement use 

only

 a calibrated densitometer 

MacBeth TR-924, X-Rite 331, X-Rite 341, X-Rite 301, X-Rite 310 or Gretag 
D200-2. Other densitometers are not supported. 

 

2005-09-09 (Type 

5366/100) 

Agfa Company Confidential

  

Summary of Contents for Drystar 5302












































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands