manualshive.com logo in svg

AGFA Drystar 5302, Technical Documentation Manual

Share
Download
AGFA Drystar 5302 Technical Documentation Manual Download Page 26

 
 
DD+DIS238.06E 

Generic Safety Directions

 
 
 

 

DOCUMENT CONTROL NOTE: 

The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. 

Edition 1, Revision 3 

Generic Safety Directions for HealthCare Imaging Products 

Page 22 of 

28 

18 

Safety Directions for Installation Activities 

 

•

  If not otherwise stated, installation and configuration is performed by Agfa HealthCare 

trained personnel.  

•

  If damage of the package is visible from the outside contact your local AGFA 

representative. 

•

  Apart from wearing the required protective clothing, e.g. safety boots and gloves, care 

must be taken that heavy loads are correctly lifted/carried to avoid injury. The relevant 
instructions must be complied with. Heavy or awkward loads must be moved by 
mechanical means or by several people. 

•

  When installing the product be sure that there is either a mains plug or an all-cable 

disconnecting device in the internal installation fitted near the product and that it is 
easily accessible. 

•

  Defective covers, sharp edges or protruding parts of equipment can cause injuries, if 

accidentally knocked into. Route cables and position equipment safely. 

•

  This device should be installed behind the institution firewall for network security and 

anti-virus protection. No ongoing computer virus protection or network security for this 
medical device is provided (e.g., a computer firewall). Network security and anti-virus 
provisions are the ongoing responsibility of the user or institution. 

 
 
 

Connection of the device to the power supply: 

 

 

 

CAUTION:  
Risk of damaging the device by using the wrong power supply: 

 

INSTRUCTION: 

Prior to connecting the device to the mains: 

•

  Compare the power requirements indicated on the type label with the available 

power supply in the installation room. 

•

  Check the service manual for the type of input voltage selection, manual or 

automatic: If manual, select the appropriate voltage and fuses. 

•

  Confirm to use the correct socket and plug for the required power supply. 

•

  Check the equipment will work with the power supply available. 

 
 

07-2009

 

 

Agfa Company Confidential

 

 

Summary of Contents for Drystar 5302












































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands