AGCO LELY RPC 130 F, Original Operator'S Manual

Page: 56 / 168

Setting Unit Minimum - Maximum Default/Advised
Roller drive fast. % 0-100 60
Set the speed of the bale on the wrapping table
during full speed wrapping.
This adjustment is only shown and adjustable when
Roller control is "OFF".
Setting Unit Minimum - Maximum Default/Advised
Roller drive slow. % 0-100 35
Set the speed of the bale on the wrapping table
during the start of wrapping.
This adjustment is only shown and adjustable when
Roller control is "OFF".
Setting Unit Minimum - Maximum Default/Advised
Film break alarm. - "OFF" / "Stop at 1st" /
"Stop at 2nd"
"Stop at 1st"
• "Stop at 1st" - Stop and give an alarm when
damage occurs to 1 film
• "Stop at 2nd" - Stop and give an alarm when
damage occurs to 2 films (the wrapper will
continue with damage to 1 film)
• "Off" - Do not stop and give an alarm when
damage occurs to a film.
Use the values in the table given as a guide.
Film roll width Film overlap Film layers Roller drive fast Revolutions per
bale
500 mm 55% 2 55% 6
4 55% 11
6 55% 16
70% 3 40% 9
6 40% 16
750 mm 55% 2 70% 5
4 70% 8
6 70% 12
70% 3 55% 6
6 55% 12
2. Introduction
56 Baler Wrapper Combination
4900.LE.EN01