AGCO LELY RPC 130 F, Original Operator'S Manual

Page: 19 / 168

Key Decal Explanation
16
Direction of the wrapping ring
The arrow shows the direction of the wrapping ring.
17
Selection of movement
1. Hydraulic valve up: Only movement of wrapping table rollers is
possible.
2. Hydraulic valve down: Movement of wrapping table rollers and
wrapping ring is possible.
18
Warning: Risk of injury
Transport lock of bale tipper (optional). Read the transport position
section on how to lock the bale tipper before driving.
19
Warning: Parts that move
Close the guard covers before you start to operate the machine.
20
Adjust the variable load valve
To drive on the road, set the variable load valve on the compressed-air
brake to the "full brake force".
21
Caution
Monitor the direction of movement of the crank handle in the support
foot when you lift or lower the support foot.
• To move the support foot quickly, you must pull the crank handle out
of the support foot to the stop
• Up: Turn the crank handle clockwise
• Down: Turn the crank handle counter clockwise
• To move the support foot slowly, you must push the crank handle in
to the support foot to the stop
• Up: Turn the crank handle counter clockwise
• Down: Turn the crank handle clockwise.
22
Danger: Risk of injury
Keep out of the range of the support foot plate when lowering the
support foot.
4
1. Safety
Baler Wrapper Combination 19
4900.LE.EN01