AGCO LELY RPC 130 F, Original Operator'S Manual

Page: 153 / 168

5.5 Replace a Transport Wheel
Before starting the procedure
• Make sure that you disengage the Power Take-Off (PTO) and stop the tractor engine, and the PTO and
all parts that move must stop before you do work
• Make sure that the machine cannot move
• Obey local safety legislation when you do maintenance on the public road
• The jack must only support the axle beam (and not other parts) to prevent damage or unwanted
movement
• Only place the jack at the position indicated by the lifting point decal
• Make sure that you tighten the wheel nuts to the correct torque and tighten again after you move for 1
hour
• Only replace tyres with approved types that correspond with the type approval of the machine. Speak to
your local dealer for more data. When local legislation requires, see the Certificate of Conformation that
is supplied with the machine to find the approved tyres
• Make sure that all transport wheels are of the same tyre type!
Necessary to complete the procedure.
• A jack with sufficient load capacity for the machine and its load
• Calibrated torque wrench
• If necessary more load support for the machine
• A support tool to remove the transport wheel.
Related Links
Technical Specifications page 159
5.5.1 To Prepare for the Procedure
Procedure
1.
Make sure that the machine is in correct contact with the tractor and they are on a solid and level
surface.
2.
Make sure that you disengage the PTO shaft, stop the engine of the tractor and remove the key.
3.
Apply the parking brake (if present).
4.
Correctly position the wheel chocks.
5.5.2 Remove the Wheel
Procedure
1.
Put the jack below the axle, adjacent to the lifting point decal. Make sure that it is near to the wheel
you will remove.
2.
Loosen the wheel nuts (maximum of one turn).
3.
Lift the machine with the jack until the wheel is a small distance off the ground.
4.
Remove the wheel nuts from the wheel.
5.
Remove the wheel.
GUID-0AEC8EB8-B843-409B-8C2E-40DAD8F2B7AE [V1]
TASK_EDB1D1B8CD7646FDB8C3E35364AB8A28 [V]
TASK_C528C4BD43174420AD684D31821F4D4E [V]
5. Troubleshooting
Baler Wrapper Combination 153
4900.LE.EN01