AGCO LELY RPC 130 F, Original Operator'S Manual

Page: 47 / 168

Key
(A) Power button
Power button, push to power on
or shutdown the E-Link Pro
display.
(1) Toggle
Push to move between menus. (6) Home
Push Home to go to the Home
page.
(B) Escape
Push Escape to stop the up or
down navigation.
(2) Manual or Automatic
Push manual or automatic to
make the selection of manual or
automatic bale wrap mode.
(7) Bale setup
Push Bale setup to go to the page
where you can make the bale
adjustments.
(C) Up or down
Push Up or Down to move in
menus. Push Up or Down to
increase or decrease values.
(3) Knives
Push Knives to set the function of
the double acting valve in the
tractor to lift or lower the knives.
(8) Statistics
Push Statistics to show the page
where you can see the data.
(D) OK (Enter)
Push OK to accept the shown
selection (make the selection with
the Up or Down button).
(4) Hydroflexcontrol floor
Push Hydroflexcontrol floor to
adjust the function of the double
acting valve in the tractor to lift or
lower the Hydroflexcontrol floor.
(9) Task
Push Task to show the page
where you make and adjust a
task.
(E) Toggle
Push Toggle to move between the
virtual terminal menus and the
bale application.
(5) Pick-up
Push Pick-up to adjust the
function of the double acting valve
in the tractor to lift or lower the
pick-up.
(10) Advanced
Push Advanced to go to the page
where you can do more advanced
adjustments.
E-link Pro buttons
2.4.2 Keyboard
WARNING: Risk of impact.
Injury can occur when the parts of the machine move.
Make sure that no person is behind the machine when operated with the keyboard. Set
the Power Take-Off (PTO) to off but keep the tractor engine on for hydraulic operation with
the keyboard.
CAUTION: Risk of contact between parts of the machine.
When you operate the machine with the keyboard, impact monitoring is off. Thus the
parts you can move with the keyboard can hit and cause damage to the machine. Use the
keyboard only for maintenance and troubleshooting (for example when a bale is caught).
Operate the machine carefully to prevent damage. Do not operate the machine with the
keyboard and the E-Link Pro at the same time. On the E-Link Pro these movements can be
done on the page Adv. Menu > Manual Control.
GUID-CD2599E0-EFB5-46ED-B9DE-7D137B1A507C [V1]
2. Introduction
Baler Wrapper Combination 47
4900.LE.EN01