AGCO LELY RPC 130 F, Original Operator'S Manual

Page: 156 / 168

5.7 Defective bale shape
Before starting the procedure
WARNING: Risk of injury to persons and damage to machine.
Follow procedure accurately.
If the net does not attach to the bale immediately, it is necessary to remove the bale from the bale
chamber.
Procedure
1.
On the E-Link Pro go to the page "Adv.Menu>Bale".
2.
Set the machine from "Wrapper" to "Pass Through".
3.
Push and hold the button until the bale moves to the wrapper.
4.
Push and hold the button until the bale is released from the wrapper.
5.
Set the machine from "Wrapper" to "Active".
6.
Set the Power Take-Off (PTO) and engine to the off position and then remove the key.
7.
With the aid of persons break apart the bale and remove the net material. Make a swath from the
broken bale.
8.
Make sure that the net attach mechanism is in correct operation, then continue work.
GUID-64351C17-CBC6-47D2-B422-1A223E5BAAC7 [V1]
5. Troubleshooting
156 Baler Wrapper Combination
4900.LE.EN01