AGCO LELY RPC 130 F, Original Operator'S Manual

Page: 155 / 168

5.6 Bale Twisted on the Wrapping Table
A bale can become twisted on the wrapping table, for example on very steep terrain.
In this condition you must turn the bale to the correct position before you wrap the bale with film.
Procedure
1.
Set the Power Take-Off (PTO) to "OFF".
2.
With the tractor engine on, turn the hydraulic
shut-off valve to the up position.
GUID-CBF7B950-F0ED-4E40-BA45-9455D3D27A05-high.jpg [High]
Fig. 7
3.
On the keyboard push and hold the buttons
+ (1) and wrapping ring (5). Only the
wrapping table rollers move because of the
position of the shut-off valve.
4.
When the bale is in the correct position,
release the buttons.
5.
Turn the hydraulic shut-off valve to the down
position.
GUID-3CC459C6-18A6-4C1A-93F4-8FA216691141-high.jpg [High]
Fig. 8
6.
Set the PTO to "ON" and continue work.
GUID-44D5DCAE-B72F-4708-B221-11F5FB2688DB [V1]
5. Troubleshooting
Baler Wrapper Combination 155
4900.LE.EN01