Aficio 3228C, Operating Instructions Manual

Page: 961 / 1150

Settings
101
9
Settings
Scan Settings
This section explains how to set the
defaults for scan settings.
The scan settings consist of the fol-
lowing. For the table about settings
and defaults, see p.97 “Scanner Fea-
tures”.
❖
❖ ❖
❖
Default Scan Settings
Various basic settings (scan type,
resolution, image density, and
scan size) can be set. You can regis-
ter the scan settings in the same
way as specifying them. For de-
tails, see p.73 “Specifying Scan Set-
tings”.
• Scan Type
• Resolution
• Image Density
• Scan Size
❖
❖ ❖
❖
Wait Time for Next Orig.: Exposure Glass
When dividing originals and scan-
ning them individually with the
exposure glass to form a single file,
select
[ Off ]
,
[ Set Wait Time ]
, or
[ Con-
tinuous Wait ] for the waiting status.
Note
❒
If [ SADF ] or [ Batch ] is specified as
[ Original Feed Type ]
when scan-
ning, this setting is invalid. For
details, see p.77 “Batch/SADF
selection”.
❒
If [ Off ] is selected, sending will
start automatically after one
page of original is scanned.
❒
If
[ Set Wait Time ]
is selected, en-
ter the wait time in seconds (3-
999) for placing additional orig-
inals with the number keys.
Scanning will start if additional
originals are placed and the
{{{{
Start
}}}}
key is pressed within
this time. You can end scanning
and begin tran sm is sion by
pressing the
{{{{
#
}}}}
key within this
time. Once the specified time
has elapsed, transmission starts
automatically.
❒
If
[ Continuous Wait ]
is selected,
the machine will wait for addi-
tional originals until the
{{{{
#
}}}}
key
is pressed. Scanning will start
when additional originals are
placed and the
{{{{
Start
}}}}
key is
pressed. You can end scanning
and begin sending by pressing
the
{{{{
#
}}}}
key.
❒
If originals are placed in the au-
t o m a t i c d o c u m e n t f e e d e r
(ADF), transmission will start
without waiting for additional
originals after all originals in
the ADF have been scanned, re-
gardless of the specified set-
tings.
❒
If a paper misfeed occurs or any
of the following operations is
performed while the machine is
waiting for additional originals,
the countdown stops and does
not start again until the
{{{{
#
}}}}
key
is pressed.
• Changing the settings such
as the scan settings
• Opening the upper cover of
the ADF
• Pressing the
{{{{
Interrupt
}}}}
key to
activate the copy mode