Aficio 3228C, Operating Instructions Manual

Page: 804 / 1150

Administrator Setting
170
9
Changing the User Parameters
Preparation
Access to some User Parameter
Settings requires installation of op-
tional equipment, or that other set-
tings be made beforehand.
Important
❒
We recommend you print and
keep a User Parameter list when
you program or change a User Pa-
rameter. See p.171 “Printing the
User Parameter List”.
❒
Do not change any bit switches
other than those shown on the pre-
vious pages.
AAAA
Press the
{{{{
User Tools/Counter
}}}}
key.
BBBB
Press [ Facsimile Features ] .
CCCC
Press [ Administrator Tools ] .
DDDD
Press
[ Parameter Setting ]
.
EEEE
Select the switch number you
want to change.
FFFF
Select the bit number you want to
change.
When the bit number is pressed,
the current value switches be-
tween 1 and 0.
Note
❒
Repeat from step
F
to change
another bit number for the same
switch.
GGGG
Press [ OK ] .
32 0 Quotation Priority for a desti-
nation when there is no desti-
nation of the specified type.
Paper Output Pri-
ority <Priority Or-
der>
1. IP-Fax destina-
tion
2. Fax number
3. E-mail address
4. Folder
Electronic Output
Priority <Priority
Order>
1. E-mail address
2. Folder
3. IP-Fax destina-
tion
4. Fax number
34 0 Use gatekeeper server with
IP-Fax
Off On
1 Use SIP server with IP-Fax Off On
Switch Bit Item 0 1
JupterC2_Fax_AE-F_FM.book Page 170 Monday, December 13, 2004 2:32 PM