manualshive.com logo in svg

Aficio 3228C, Operating Instructions Manual

Share
Download
Aficio 3228C Operating Instructions Manual Download Page 951

When a Message Is Displayed

91

8

Exceeded time limit for LDAP server 

search. Check the server status.    

A network error has occurred and 
connection has failed. Try the opera-
tion once more. If the message is still 
shown, the network may be crowd-
ed. Check the information of System 
Settings. See "User Tools (System 
Settings)", 

General Settings Guide

.

LDAP server authentication has failed. 

Check the settings.    

Make settings correctly for the user 
name and the password for LDAP 
server authentication.

Load paper of the following sizes. Re-

quired: A3

S

 B4

S

 A4

S

 A4

R

Load paper of the sizes listed in the 
message.

Memory is full. Cannot scan. The 

scanned data will be deleted.   

Because of insufficient hard disk 
space, the first page could not be 
scanned. Try one of the following 
measures:

• Wait for a while, and then retry 

the scan operation.

• Reduce the scan area or scanning 

resolution. See p.97 “Scan Set-
tings”.

• Delete unneeded stored files. See 

p.54 “Deleting Files”.

Memory is full. Do you want to store 

scanned file?    

Because there is not enough free 
hard disk space in the machine for 
storing in the Document Server, only 
some of the pages could be scanned. 
Specify whether to use the data or 
not.

Memory is full. Press [Send] to send 

the current scanned data, or press 

[Cancel] to delete.   

Because there is not enough free 
hard disk space in the machine for 
delivering or sending by e-mail 
while storing in the Document Serv-
er, only some of the pages could be 
scanned. Specify whether to use the 
data or not.

Original is being scanned by another 

function.

The machine is using another func-
tion such as copying. Retry scanning 
after the operation with the other 
function is completed.

Output buffer is full. Sending the 

data has been cancelled. Please try 

again later.   

Too many files are waiting to be de-
livered. Please try again after they 
have been delivered.

Selected file is currently in use. 

Cannot change file name.    

You cannot change the name of a file 
whose status is “Waiting...” or that is 
being edited with DeskTopBinder. 
Change the file name after canceling 
delivery or completing editing.

Message

Causes and solutions

Summary of Contents for 3228C































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands