Aficio 3228C, Operating Instructions Manual

Page: 229 / 1150

Copying from the Bypass Tray
23
2
BBBB
Insert the paper with the side you
want to copy facing up until you
hear the beep, and align the paper
guide to the paper size.
1: Extender
Important
❒
If the guides are not flush against
the copy paper, image skewing
or misfeeds might occur.
Note
❒
Do not stack paper over the lim-
it mark, if you do image skew-
ing or misfeeds might occur.
❒
Swing out the extender to sup-
port paper sizes larger than
A4
L , 8
1
/
2
"
×
11" L .
❒
Fan paper to get air between the
sheets and avoid multi-sheet
feeds.
CCCC
Select the paper type and size.
Note
❒
When copying onto OHP trans-
parencies or thick paper, see
p.24 “When copying onto OHP
Transparencies or Thick Paper”.
❒
When copying on the back side
of paper, see p.25 “When Copy-
ing on the Back Side of the Pa-
per”.
When copying onto standard size
paper
A
Press the
{{{{
#
}}}}
key.
The "Bypass Tray Paper" screen
is displayed.
B
Press [ Select Size ] .
C
Select the paper size.
D
Press [ OK ] twice.
When copying onto custom size
paper
A
Press the
{{{{
#
}}}}
key.
B
Press
[ Custom Size ]
.
C
Enter the vertical size of the pa-
per using the number keys,
and then press
[ # ] .
D
Enter the horizontal size of the
paper using the number keys,
and then press
[ # ] .
Note
❒
If [ Horiz. ] is not highlighted,
press
[ Horiz. ]
.
ZKVH130J
JupiterC2_GB_Copy_F_FM.book Page 23 Thursday, October 28, 2004 7:16 PM